Hi,
OpenSSH scp doesn't seem to be compatible with scp2 from ssh.com. Just
have a look at
http://www.derkeiler.com/Newsgroups/comp.security.ssh/2002-02/0226.html
for further explanation.
You should use sftp for your file transfers.
Regards,
Jean-Jacques Doti
Heng Kuo Kuang Kelvin NCS a écrit :
Hi guys,
Do you have any experience on why this is happening?
I have OpenSSH and FSecure SSH in my environment.
When I tried to perform SSH or SFTP from OpenSSH client to FSecure SSH
Server, there is no problem. However, when I tried to perform a SCP from
OpenSSH client to FSecure SSH server, i encountered some problems.
Please see debug info below:
debug1: Authentications that can continue: publickey,password
debug3: start over, passed a different list publickey,password
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /.ssh/id_rsa
debug3: no such identity: /.ssh/id_rsa
debug1: Offering public key: /.ssh/id_dsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Server accepts key: pkalg ssh-dss blen 433
debug2: input_userauth_pk_ok: fp
47:ff:f3:45:a2:e4:2a:f4:6a:75:e4:35:6d:ce:70:c0
debug3: sign_and_send_pubkey
debug1: read PEM private key done: type DSA
debug1: Authentication succeeded (publickey).
debug2: fd 5 setting O_NONBLOCK
debug2: fd 6 setting O_NONBLOCK
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: client_session2_setup: id 0
debug1: Sending command: scp -v -f /etc/profile
debug2: channel 0: request exec confirm 0
debug2: fd 4 setting TCP_NODELAY
debug2: callback done
debug2: channel 0: open confirm rwindow 100000 rmax 32768
debug2: channel 0: rcvd ext data 123
scp: warning: Executing scp1.
scp: FATAL: Executing ssh1 in compatibility mode failed (Check that scp1
is in your PATH).
debug2: channel 0: written 123 to efd 7
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug2: channel 0: rcvd close
debug2: channel 0: output open -> drain
debug2: channel 0: close_read
debug2: channel 0: input open -> closed
debug3: channel 0: will not send data after close
debug2: channel 0: obuf empty
debug2: channel 0: close_write
debug2: channel 0: output drain -> closed
debug2: channel 0: almost dead
debug2: channel 0: gc: notify user
debug2: channel 0: gc: user detached
debug2: channel 0: send close
debug2: channel 0: is dead
debug2: channel 0: garbage collecting
debug1: channel 0: free: client-session, nchannels 1
debug3: channel 0: status: The following connections are open:
#0 client-session (t4 r0 i3/0 o3/0 fd -1/-1 cfd -1)
debug3: channel 0: close_fds r -1 w -1 e 7 c -1
debug1: fd 0 clearing O_NONBLOCK
debug1: fd 1 clearing O_NONBLOCK
debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes in 0.2 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.0
debug1: Exit status 255
Regards,
Kelvin Heng
