Normally it's exactly what the error says:
"Most likely the sftp-server is not in the path of the user on the server-side."
The F-Secure SSH Client first makes a standard SSH connection to the
server and then attempts to start the sftp-server with the user
credentials you entered in the sftp client app.
The easiest way to test this is to make a normal ssh terminal
connection, then as the same user run the following command:
type sftp-server
If your SSH Server is on a windows box then run the "path" command
from the command prompt and check that the F-Secure path is there.
HTH,
Nathan
On 8/15/06, ronald.warren@firstdatacorp.com
<ronald.warren@firstdatacorp.com> wrote:
I'm using :
F-Secure SSH Client 5.3 build 23 and F-Secure SSH File Transfer
It works fine when I use the SSH Client. But, when I'm using sftp,
it
displays :
File transfer server could not be started or it exited unexpectedly.
Exit value 0 was returned. Most likely the sftp-server is not in the
path of
the user on the server-side.
What can be happening ?
TMDSM - Distributed Software Migration
First Data Resources
Office: 402-777-5979
Primary TMDSM pager # 221-1020
Back-up TMDSM pager # 221-1509
ronald.warren@firstdatacorp.com
-----------------------------------------
The information in this message may be proprietary and/or
confidential, and protected from disclosure. If the reader of this
message is not the intended recipient, or an employee or agent
responsible for delivering this message to the intended recipient,
you are hereby notified that any dissemination, distribution or
copying of this communication is strictly prohibited. If you have
received this communication in error, please notify First Data
immediately by replying to this message and deleting it from your
computer.
