Greetings,
Yesterday I began experiencing problems with my new install of redhat
WS 4. In the morning I was able to connect to my AIX 5.2.0.4 machines
and make X11 apps show up on my desktop. By the end of the day I tried
to connect to these same servers and can no longer get X windows to
start up. I've done an xhost+ even to see if that would help and it did
not. So now I'm to the point where I'm running ssh in debug mode and I
come across this error I've never seen before and googling for it
doesn't return any results. Here is a copy of the error I'm receiving:
[tjohnson@tjohnson .ssh]$ xhost +
access control disabled, clients can connect from any host
[tjohnson@tjohnson .ssh]$ ssh -vvv tjohnson@hqs6000q.genpt.net nwadmin
OpenSSH_3.9p1, OpenSSL 0.9.7a Feb 19 2003
debug1: Reading configuration data /home/tjohnson/.ssh/config
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to hqs6000q.genpt.net [10.28.1.62] port 22.
debug1: Connection established.
debug1: identity file /home/tjohnson/.ssh/identity type -1
debug3: Not a RSA1 key file /home/tjohnson/.ssh/id_rsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: missing keytype
debug1: identity file /home/tjohnson/.ssh/id_rsa type 1
debug1: identity file /home/tjohnson/.ssh/id_dsa type -1
debug1: Remote protocol version 1.99, remote software version
OpenSSH_3.8.1p1
debug1: match: OpenSSH_3.8.1p1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.9p1
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit:
diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit:
diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 124/256
debug2: bits set: 526/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: check_host_in_hostfile: filename /home/tjohnson/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 10
debug3: check_host_in_hostfile: filename /home/tjohnson/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 10
debug1: Host 'hqs6000q.genpt.net' is known and matches the RSA host key.
debug1: Found key in /home/tjohnson/.ssh/known_hosts:10
debug2: bits set: 515/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/tjohnson/.ssh/identity ((nil))
debug2: key: /home/tjohnson/.ssh/id_rsa (0x99d6690)
debug2: key: /home/tjohnson/.ssh/id_dsa ((nil))
debug1: Authentications that can continue:
publickey,password,keyboard-interactive
debug3: start over, passed a different list
publickey,password,keyboard-interactive
debug3: preferred gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/tjohnson/.ssh/identity
debug3: no such identity: /home/tjohnson/.ssh/identity
debug1: Offering public key: /home/tjohnson/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Server accepts key: pkalg ssh-rsa blen 149
debug2: input_userauth_pk_ok: fp
af:5c:05:3d:7c:44:7f:76:21:ad:66:55:a5:f1:c8:8d
debug3: sign_and_send_pubkey
debug1: read PEM private key done: type RSA
debug1: Authentication succeeded (publickey).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: client_session2_setup: id 0
debug1: Sending command: nwadmin
debug2: channel 0: request exec confirm 0
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel 0: rcvd adjust 131072
debug2: channel 0: rcvd ext data 35
debug2: channel 0: rcvd ext data 28
debug2: channel 0: rcvd eof
debug2: channel 0: output open -> drain
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug2: channel 0: rcvd close
debug2: channel 0: close_read
debug2: channel 0: input open -> closed
debug3: channel 0: will not send data after close
debug2: channel 0: obuf_empty delayed efd 6/(63)
Set program group failed: Not ownerError: Can't open display:
debug2: channel 0: written 63 to efd 6
debug3: channel 0: will not send data after close
debug2: channel 0: obuf empty
debug2: channel 0: close_write
debug2: channel 0: output drain -> closed
debug2: channel 0: almost dead
debug2: channel 0: gc: notify user
debug2: channel 0: gc: user detached
debug2: channel 0: send close
debug2: channel 0: is dead
debug2: channel 0: garbage collecting
debug1: channel 0: free: client-session, nchannels 1
debug3: channel 0: status: The following connections are open:
#0 client-session (t4 r0 i3/0 o3/0 fd -1/-1 cfd -1)
debug3: channel 0: close_fds r -1 w -1 e 6 c -1
debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes in 0.1 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.0
debug1: Exit status 1
Now I've done a xhost+ to ensure that doesn't cause problems.
hqs6000q.genpt.net is the AIX box. tjohnson is the redhat WS 4 box.
I can successfully connect to other Redhat ES/AS servers and do X-apps,
only the AIX servers now don't work. Those other Redhat servers can
successfully connect and run X-apps. It appears to only be my
workstation that's broke. Any help would be GREATLY appreciated.
--
Thanks,
Travis Johnson
Unix Administrator
travis_johnson@genpt.com
RHCT: 603004537490640
This email message and all attachments may contain privileged and
confidential information intended solely for the use of the addressee.
If the reader of this message is not the intended recipient, any
reading, distribution, copying or other use of this message is
prohibited and you should delete this message and advise the sender or
contact the Genuine Parts Company Employee Service Center at (770)
850-2350. Thank you.
