Hallo ,
do you have any network connection / IP adress configured on this host?
if, please check, if there is an opportunity to let the sshd know, to
use this interface
(sshd conf or smth like that....)
after that, checkt the ouput, especially the line "Bind to port....."
good luck
David Ho wrote:
Hi all,
I am compiling sshd version OpenSSH_4.0p1 natively on an embbeded ppc for
secure access to the unit. I have managed to build the executables with
PAM support on this measly 60MHz, 128MB MPC8xx.
However when I try to connect to the daemon from a Linux box this is the
result I got at the server, debug enabled.
Any help is much appreciated.
Thanks, David
bash-2.05b# /usr/local/sbin/sshd -d
debug1: sshd version OpenSSH_4.0p1
debug1: private host key: #0 type 0 RSA1
debug1: read PEM private key done: type RSA
debug1: private host key: #1 type 1 RSA
debug1: read PEM private key done: type DSA
debug1: private host key: #2 type 2 DSA
debug1: rexec_argv[0]='/usr/local/sbin/sshd'
debug1: rexec_argv[1]='-d'
socket: Address family not supported by protocol
debug1: Bind to port 22 on 0.0.0.0.
Server listening on 0.0.0.0 port 22.
Generating 768 bit RSA key.
RSA key generation complete.
debug1: Server will not fork when running in debugging mode.
debug1: rexec start in 4 out 4 newsock 4 pipe -1 sock 7
debug1: inetd sockets after dupping: 3, 3
Connection from 199.71.138.9 port 34673
debug1: Client protocol version 2.0; client software version OpenSSH_3.5p1
debug1: match: OpenSSH_3.5p1 pat OpenSSH_3.*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-1.99-OpenSSH_4.0
debug1: permanently_set_uid: 95/95
debug1: list_hostkey_types: ssh-rsa,ssh-dss
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received
debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT
debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: KEX done
Disconnecting: Corrupted MAC on input.
debug1: do_cleanup
debug1: do_cleanup
