Hi Greg!
this sounds promising!
I will have a look at this USE_SHARED_SOCKET stuff next week, when I can
test it again.
BTW, since this works on Linux, do you know it Linux is using shared
sockets by default? And if I stop the listener on Linux, will I also
loose remote connections?
kind regards,
Rainer
Greg Norris wrote:
It sounds like you're running into Oracle's port redirection... it does
this by default on Windows servers. The basic sequence of events is:
1) Client connects to the database listener.
2) Listener allocates a dynamic port, and sends back the relevant
details... both hostname/IP-address and port number.
3) Client reconnects to the indicated IP and port.
Step 3 will be where the breakage occurs, as machine r is now trying to
connect directly to w. You can address this in either of the following
ways:
1) Set USE_SHARED_SOCKET in the registry of machine w. This is the
simplest method, as it prevents the redirect from ever occurring.
It's adequate in most cases, but has significant side-effects...
most notably, all remote connections will be dropped if the
listener is stopped or restarted.
2) Run Oracle Connection Manager (CMAN) on either machine l or w, and
let it handle the redirect (so the client never sees it). This
will require changes to the database connection details, as well as
the port you're tunnelling.
If you have access to Metalink (Oracle Support website), just do a
search on CMAN and/or USE_SHARED_SOCKET and you should find all of the
necessary details with little trouble. If not, email me privately and
I'll try to provide more specific instructions.
On Thu, Dec 02, 2004 at 01:29:46PM +0100, Rainer Lay wrote:
Hi,
I have here a complicated setup for port forwarding. I want to forward a
port of a oracle database. Three computers are involved:
w: windows machine with oracle installed
r: remote, linux. Here I want to run some oracle tools
l: local, linux. A Box between those two
I want to access the database on w from r. There is no direct connection
between w and r. I only have a ssh tunnel from r to l.
To establish the connection, I startet a ssh connection to r on l and
forward port 11523 on r to port 1521 on w:
ssh -v r -R 11523:w:1521 -g -N
Trying to use the oracle tools on r, I cannot get the connection to w.
But it should work. :-)
Accessing the oracle port on w from l directly works without problems.
So there must be something wrong with the tunnel.
Any ideas what I am doing wrong?
kind regards,
Raine
r
