Check out the .nessusrc file. that has a setting for deciding which ports to
scan. the option you are looking for is called "port_range", which can look
like "default" or "1-65535" or "22-25,80,443" and all points in between
On 1/30/07, Sk8board Kid <sk8boardkid@gmail.com> wrote:
I would like to launch nessus from the command line using my nessus
server on 127.0.0.1 in linux but would like it to skip the
portscanning and use a list of ports that i specify instead.
I thought I could create a kb in
/opt/nessus/var/nessus/users/nessus/kbs/127/0/0/127.0.0.1
with the following content:
1170151262 3 Launched/10180=1
1170151262 3 Launched/10335=1
1170151262 3 Ports/tcp/80=1
1170151262 3 Ports/tcp/443=1
1170151262 3 Host/scanned=1
1170151262 3 Host/scanners/nessus_tcp_scanner=1
drwx------ 2 root root 4096 Jan 30 10:23 .
drwx------ 3 root root 4096 Jan 29 15:04 ..
-rw-r----- 1 root root 193 Jan 30 10:21 127.0.0.1
although the scan seems to work as expected, the kbs file is not
updated with the scans results.
If i remove the file nessus runs from scratch saving it's kb with all the
info.
Is there another way to do get the desired effect?
Thanks
_______________________________________________
Nessus mailing list
Nessus@list.nessus.org
http://mail.nessus.org/mailman/listinfo/nessus
--
Doug Nordwall
Unix, Network, and Security Administrator
Noise proves nothing. Often a hen who has merely laid an egg cackles as if
she laid an asteroid. -- Mark Twain
_______________________________________________
Nessus mailing list
Nessus@list.nessus.org
http://mail.nessus.org/mailman/listinfo/nessus
