Thanks for all the responses especially Marek for directing me to the
correct solution from Sun.
http://sunsolve.sun.com/search/document.do?assetkey=1-25-73377-1
It was an OBP setting, but not the output-device and input-device the
majority of people suggested. Even if these are set to screen and keyboard,
respectively, the server will still default to ttya for input and/or output
if they are not detected. The E450 server will boot without a monitor and
keyboard with all the default OBP and kbd settings. My problem was that the
value OBP ttya-ignore-cd had been changed from true (default) to false.
Once this was reset to true the sever boots fine with neither a monitor nor
keyboard connected even with output-device=monitor and
input-device=keyboard. Also, I am able to connect and disconnect from the
console at any point using a proper terminal emulator and cable connected to
ttya. I use the serial port on my laptop, a null modem cable, and
SecureCRT.
-----Original Message-----
From: Marek Antozi [mailto:Marek.Antozi@Sun.COM]
Sent: Thursday, September 02, 2004 6:00 AM
To: Steiner, Jason (OCFO)
Cc: focus-sun@securityfocus.com
Subject: Re: E450 - hangs when booting without keyboard and monitor
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello Jason.
Maybe document at
"http://sunsolve.sun.com/search/document.do?assetkey=1-25-73377-1"; will help
you. It is called "Server without a keyboard hangs in boot process".
Next time before mailing to mailing list use "http://sunsolve.sun.com/";.
Regards.
- -Marek Antozi
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (SunOS)
Comment: For info see http://www.gnupg.org
iD8DBQFBNu8XDfUZjsbiBSwRAms7AKCrYgMvXsfk/dP4b4Oj5C5SpqLdBQCaAmtD
cPnnZ8JQ4Y1Fr1ZYHivxCgg=
=QFjH
-----END PGP SIGNATURE-----
