Ethical Hacking Learn to find vulnerabilities before the bad guys do! Gain real world hands on hacking experience in our state of the art hacking lab. Course designed and taught by expert instructors with years of penetration testing experience. 12 student maximum in every class. Certification attempt included in every package. | Computer Forensics Training at InfoSec Institute Gain the in-demand skills of a certified computer examiner, learn to recover trace data left behind by fraud, theft, and cybercrime perpetrators. Discover the source of computer crime and abuse at your organization so that it never happens again. All of our class sizes are guaranteed to be 12 students or less to facilitate one-on-one interaction with one of our expert instructors. |

| Subject: | RE: Serious Security Issue in Windows XP SP2's Firewall |
|---|---|
| Date: | Tue, 28 Sep 2004 13:47:15 -0700 |
Do you have the right conditions? 1. Running XP SP1 2. file and printer sharing enabled on a LAN connection 3. ICF enabled on a dial up conn, or second NIC 4. When you upgrade to SP, file and printer sharing exceptions will be enabled via ICF on all interfaces -----Original Message----- From: Thor [mailto:thor@hammerofgod.com] Sent: Thursday, September 23, 2004 1:47 AM To: Jens Mickerts; focus-ms@securityfocus.com Subject: Re: Serious Security Issue in Windows XP SP2's Firewall I have tested this many times, and cannot reproduce the behavior described here- I've gone out of my way to try to make this happen, and can't. I'm no guru, but I would hope that if this was possible, I'd be able to make it happen. Please give us detailed instructions that we can reproduce. T ----- Original Message ----- From: "Jens Mickerts" <jens@mickerts-partner.de> To: "Thor" <thor@hammerofgod.com>; <focus-ms@securityfocus.com> Sent: Wednesday, September 22, 2004 11:47 PM Subject: AW: Serious Security Issue in Windows XP SP2's Firewall Hi, the report is correct. If you update a WinXP SP-1 with enabled Internet Connection Firewall (enabled for a single dial-up connection is sufficient) and no internet connection sharing enabled (I do not know what the heck is different with ICS enabled), the File and Print Sharing will be world visible on any interface after applying SP-2 and enabling the Firewall! If there is no ICF enabled before upgrade things seem to work fine, if ICS is enabled before the upgrade things also work fine. This is very strange and dangerous indeed. Regards, Jens -----Ursprüngliche Nachricht----- Von: Thor [mailto:thor@hammerofgod.com] Gesendet: Dienstag, 21. September 2004 21:56 An: focus-ms@securityfocus.com Betreff: Fw: Serious Security Issue in Windows XP SP2's Firewall This article in pc-welt was brought to my attention yesterday, and I just have no idea what they are talking about. It is like the entire piece is totally bogus-- has anyone seen anything about this? T ----- Original Message ----- From: "Andreas Marx" <amarx@gega-it.de> To: <bugtraq@securityfocus.com> Sent: Sunday, September 19, 2004 2:23 AM Subject: Serious Security Issue in Windows XP SP2's Firewall
Hello, this might be interesting for you (see below): Please note that all screenshots and more details can be found in the German article only (see links), the English one is slightly shortened. cheers, Andreas Marx PC-WELT discovers and fixes serious security issue in Windows XP SP2 by Andreas Kroschel and Thorsten Eggeling; Sep 15, 2004 English version: <http://www.pcwelt.de/know-how/extras/103039/> German version: <http://www.pcwelt.de/news/sicherheit/103013/> Windows XP Service Pack 2 with Advanced Security Technologies helps you protect your PC against viruses, hackers, and worms." - this is how Microsoft promotes its Service Pack 2 on its website. What the company does not say: Instead of viruses, worms, and hackers, the supposedly safe SP2 for Windows XP invites any Internet user to have a look around your PC. As soon as you install SP2 on a Windows XP PC with a certain configuration, your file and printer sharing data are visible worldwide, despite an activated Firewall. This also applies to all other services. The PC only has to provide sharing for an internal local network and connect to the Internet via dial-up or ISDN. Users of DSL services are also affected, if a firewall is not integrated into the DSL modem or a common modem instead of a DSL router is used. Additionally, Internet Connection Sharing of the PC has to be disabled. A number of test scans run by PC-Welt revealed that this in fact is a common configuration and not a rare sight. Without great effort, we were able to discover private documents on easily accessible computers on the Internet. It must be assumed, that these users wrongly believe they are safe and that their sharing configurations are only visible in their network at home: Often, we did not even encounter password protection. Already Windows 95 affected by a similar problem Experienced Windows users may remember that there was a similar problem in the past, specifically with Windows 95. Back then, Microsoft forgot to separate file and printer sharing from the dial-up network adapter when such a connection was configured. In other words, this caused the service to be released worldwide through the dial-up connection as soon as you were connected to the Internet. Microsoft at that time issued an update to patch the bug. The fact that file and printer sharing since then is not connected to the dial-up connection anymore, can easily be seen on your system: Right-click on the symbol "My Network Places" and select "Properties". Repeat the right-click and selection with the icon of your dial-up connection and select the tab "Settings". If there is no check at "File and Printer Sharing", it indicates that this service should not be made available through your dial-up connection. This in fact is true for Windows XP without Service Pack. Since SP1, this configuration is hardly more than cosmetics and does not serve any purpose anymore. This means, the file and printer sharing service is connected in general, also to the dial-up network adapter. This in itself is a serious bug, since your shared data potentially could be seen on the Internet. However, there are no catastrophic effects, as every dial-up connection is configured with an activated firewall by default. If you intended to deactivate this firewall, Windows displayed an easily recognizable dialog, that this choice would allow access to your computer. Despite the bug in SP1, the configuration of the firewall was worked out in a clean way: You were able to run the dial-up connection with a firewall and the internal network card without, because the latter was supposed to enable access through the Windows network. SP1 + SP2 leads to a catastrophic error Due to the bug carried over from SP1 as well as a new bug, the firewall configuration with SP2 has a catastrophic effect. The SP2 installation simply uses the previous configuration of the firewall: If it was active for the dial-up connection, now it also has been activated for the network adapter. At the same time, an exception is determined for file and printer sharing: For the internal network card - and astonishingly also for all adapters. With the first use of the dial-up connection after installing SP2, all of your shared data are available on the Internet. Now, other users can start guessing your passwords for administrator and guest and you basically are no more secure than the first Windows 95 users with an Internet connection - thanks to Service Pack 2. How to correct the problem It is not advisable to keep this defective default configuration. However, the previous environment cannot be restored: The configuration for the firewall was changed, which does not allow the setting of active or inactive conditions or exceptions for each network adapter anymore. Now this only works for network areas. Choose "Windows Firewall" in the in the Windows Control Panel and the there the tab "Exceptions". Select "File and Print Services" and click on "Edit". Now you can see four ports which are used by the file and print sharing service. To lock the service to the outside and keep it open for the internal LAN, you have to individually select and change its area with the respective button. Our reader Yves Jerschov notified us of another bug: The value for the area set by default "Only for own network (Subnet)" only works, if the Internet Connection Sharing is activated. If this is not the case, your shared data are visible worldwide. This error can be corrected by choosing "User defined List" and entering the IP addresses that are supposed to have access - the IP addresses of your LAN. A whole range of an IP area can be entered as "192.168.x.0/255.255.255.0", if the respective addresses start with 192.168.x. After these measures, you can be sure to be as safe as you were with SP1. Great, don't you think? -- AV-Test GmbH, Klewitzstr. 7, 39112 Magdeburg, Germany Phone: +49 (0)391 6075466, <http://www.av-test.org>
--------------------------------------------------------------------------- --------------------------------------------------------------------------- --------------------------------------------------------------------------- ---------------------------------------------------------------------------
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | RE: Items within XP SP2 and Win2003, Laura A. Robinson |
|---|---|
| Next by Date: | Re: Serious Security Issue in Windows XP SP2's Firewall, Thor |
| Previous by Thread: | Re: Serious Security Issue in Windows XP SP2's Firewall, Thor |
| Next by Thread: | Re: Serious Security Issue in Windows XP SP2's Firewall, Thor |
| Indexes: | [Date] [Thread] [Top] [All Lists] |