Firewall related question but on Nortel switch, on IBM blade cetner.

This may be off topic if so please redirect me to where I might be able
to go.  A google search with the terms +gbesm +filt only gives me 1 hit,
an IBM red paper that I used to try and set the filter I have included.

Given an IBM 8677 Blade center with 8832-L1X blades and a Nortel 7 Layer
switch (GbESM) with the following:

Software Version 20.0.1.2 (FLASH image1), active configuration.

Should 
> > Filter 10  # cur
Current filter 10:
    enabled, name test
    invert disabled
    sip 10.10.10.10 255.255.255.255, dip any
    proto any
    vlan any
    action deny
    log enabled, cache disabled
    option enabled, tos 0 0 0
    idshash dip
    thash auto

disallow all traffic from server 10.10.10.10 into the switch, and to the
servers that are behind said switch?  I seem to be having issues this is
not blocking any traffic as I would hope it.  We are trying to use the
switch to limit what traffic can hit servers behind the switch and we
are using it as means to block abusive traffic to servers in the blade
center.

Can anybody offer any advice?

Thanks in advance.
-- 
Leif Ericksen <leife@dls.net>