This is the guide that I used to configure a pix 501 with a dynamic
external IP that connects to a pix 515 with a static IP.
http://www.cisco.com/en/US/customer/products/sw/secursw/ps2308/products_configuration_example09186a0080094680.shtml
HTH,
-chris
On 9/15/05, Ian Morgan <IMorgan@usceurope.com> wrote:
Is it possible to have a dynamic site to site vpn tunnel? Plant A uses
static ip addresses. However, plant B is changing its lines and the ISP
cannot supply static IP addresses for the solution chosen (don't ask!).
Instead, the ISP router in plant B is going to have a dynamic public ip and
the pix at plant B is not going to have a public ip address at all.
Plant B
Plant B Plant A
Plant A
Internet ----à ISP router (dynamic IP) ----à Pix (no public ip) -------à Pix
(Static public IP) -------à ISP Router (Static public IP) ------à Internet
Any help in this matter would be greatly appreciated.
Many thanks,
Ian Morgan.
**********************************************************************
This E-Mail and any attachments are confidential and should not be used by
anyone who is not the original intended recipient. If you are not the
addressee (or responsible for delivery of the message to such a person), you
should destroy this message and kindly notify the sender by reply E-Mail.
Use or disclosure of this E-Mail or any attachments by unintended recipients
is prohibited.
UK Can Limited cannot accept liability for statements made which are
clearly the senders own and not made on behalf of UK Can Limited. This
footnote also confirms that this email message has been swept for the
presence of computer viruses.
**********************************************************************
