There is a know bug in Checkpoint FP3 where is does not understand
certain licenses. There is a patch on the Checkpoint Web site to fix
this.
-----Original Message-----
From: Rodrigo Blanco [mailto:rodrigo.blanco.r@gmail.com]
Sent: 19 April 2005 08:22
To: Serg Belokamen
Cc: firewalls@securityfocus.com
Subject: Re: Problem connecting to CheckPoint using SmartDashboard
I would check:
- Can you ping the client IP from the firewall?
- Have you defined the client IP as management client?
- Have you installed the licenses (or are you still within the first
15-day trial period)?
- In some appliance platforms (Alteon Switched Firewall, for
instance), there is a management IP and a physical IP. If that is your
case, you should make sure you connect to the mngmt IP.
Hope this helps you. Regards,
Rodrigo.
On 4/17/05, Serg Belokamen <sergb@tpg.com.au> wrote:
Hi All,
I've installed a CheckPoint client (Smart Dashboard, if i recall
correctly) on my machine and tried connecting to the firewall.
Consistently I get an error (below). A collegue then tried to connect
via their machine by installing the client, only to get the same error
(below).
****************** ERROR START HERE ******************
Connection can not be initiated.
Make sure that the Server 'xxx.xxx.xxx.xxx' is up and running.
****************** ERROR END HERE ******************
However when trying to use the same client from a different machine,
which was the original machine (original IP) used to administer the
firewall it would connect fine.
I have found an article on client replication so more then one
operator
can administer the firewall, however it involved additional
configuration on the firewall box, which sounded a bit strange to me,
so
I decided to ask here before I screw something up.
Any help would be greatly appreciated,
Serg
------------------------------------------------------------------------
--
Test Your IDS
Is your IDS deployed correctly?
Find out quickly and easily by testing it with real-world attacks from
CORE IMPACT.
Go to
http://www.securityfocus.com/sponsor/CoreSecurity_focus-ids_040708
to learn more.
------------------------------------------------------------------------
--
------------------------------------------------------------------------
--
Test Your IDS
Is your IDS deployed correctly?
Find out quickly and easily by testing it with real-world attacks from
CORE IMPACT.
Go to http://www.securityfocus.com/sponsor/CoreSecurity_focus-ids_040708
to learn more.
------------------------------------------------------------------------
--
--------------------------------------------------------------------------
Test Your IDS
Is your IDS deployed correctly?
Find out quickly and easily by testing it with real-world attacks from
CORE IMPACT.
Go to http://www.securityfocus.com/sponsor/CoreSecurity_focus-ids_040708
to learn more.
--------------------------------------------------------------------------
