Mike
IPSEC is vendor independent and therefore IPSEC site to site VPNs
between different vendors shouldn't be a problem.
rfc2408 ISAKMP
rfc2406 ESP
rfc2402 AH
Configuring IPSec LAN-to-LAN tunnel between the Cisco Pix Firewall and
a NetScreen Firewall
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801c4445.shtml
Configuration Examples
http://www.cisco.com/en/US/tech/tk583/tk372/tech_configuration_examples_list.html
cheers
Ivan
Ivan Coric, CISSP
Senior IT Security Specialist
Information Technology
WorkCover Queensland
Ph: (07) 30066414 Fax: (07) 30066424
Email: ivan.coric@workcoverqld.com.au
"Mike Jones" <jnzy@hotmail.com> 25/02/2005 3:59:24 am >>>
We have a vendor with a Netscreen 50 that wants to connect to us via a
VPN tunnel.
They have a netscreen 50 and we have Cisco PIX's. We are also getting
ready to deploy a Cisco 3000 VPN concentrator.
Are Cisco and Netscreen compatable?
Thanks!
-----Mike
***************************************************************************
Messages included in this e-mail and any of its attachments are those
of the author unless specifically stated to represent WorkCover Queensland. The
contents of this message are to be used for the intended purpose only and are
to be kept confidential at all times.
This message may contain privileged information directed only to the intended
addressee/s. Accidental receipt of this information should be deleted promptly
and the sender notified.
This e-mail has been scanned by Sophos for known viruses.
However, no warranty nor liability is implied in this respect.
****************************************************************************
