Hello,
There is a new firewall called Hotbrick LB2 VPN. The documentation and the
prod spec seems to be great with the firewall doing the following:
**** My query is - has anyone used this product? Is there any feedback from
any person who implemented this. the price is great and the merits too good
(to be true? )
The HotBrick LB-2 VPN bandwidth aggregation feature is the perfect solution
to increase your network speed. The dual WAN Ports allow you to connect to
two separate broadband connections (DSL/Cable/T1) for automatic fail over
and load balancing <http://www.hotbrick.com/loadbalance.html> . In the event
that a VPN tunnel fails, the LB-2 VPN will re-establish a tunnel over the
second WAN port connection- Auto Failover. With its unique features such as
QoS, Dynamic DNS, multiple IP's, DMZ and up to 10 IPsec tunnels, the LB-2
VPN gives you the best return on your investment.
Specifications
Protocols NAT, PPPoE, HTTP, DHCP, TCP/IP, UPAP, CHAP, PPP, ICMP, ARP proxy,
RIPv1, Ripv2, DDNS, Static IP
Load Balance Outbound Load Balancing by bytes, packets and session with auto
backup
Throughput 55 MBits/sec
Firewall NAT/NAPT, Stateful Packet Inspection (SPI) firewall for DoS (Denial
of Service) attacks, Ping to Death, ICMP filter for WAN
Security URL filter, Access Control, Local Password
VPN encryption: DES (56-bit), 3DES (168-bit),
AES (128-bit), authentication: MD 5, SHA1, SHA2, Manual Key & IKE (Internet
Key Exchange) Passthrough support PPTP, IPSec, L2TP, PPTP Client
Management Web-based management
Applications Support MSN & NetMeeting, support with H.323VoIP products,
Multi session PPPoE, SMTP bind/SNMP, UPnP, NAT Status & connection list,
Virtual Server, Multi-DMZ, MTU changeable for WAN, Dial-on-Demand &
auto-disconnect, DDNS, Mac Address Clone, Transparent Bridge Mode, Firmware
Upgrade
WAN port 2x10/100 RJ45, auto-MDI/MDIX; 802.3/802.3u
LAN port 4xRJ45 10/100, auto-MDI/MDIX; 802.3/802.3u
Hardware RISC 166Mhz Processor, 1Mb Flash Memory, 16 Mb RAM
Power DC 5V/1.5A
Dimension 245mm(W) x 137mm(D) x 30mm(H); 1.15lbs.
Certification FCC Class B; CE
Key Features
VPN IPSec up to 10 Tunnels
Dual WAN Ports
Outbound Load Balancing
Share Internet Access via DSL/Cable Modem
4-port Layer 2 Switching Hub
Basic Features
NAT/NAPT (Network Address Port
Translation) PPPoE & PPTP support
Dial-on-demand and Auto Disconnect for PPPoE
DHCP Server/Client
Web-based Management
Advanced Features
Rule-based Policy Firewall
URL Filter to block access to undesirable
sites
Stateful Packet Inspection (SPI) Firewall
protects against DoS (Denial of Service)
attacks Access Control
UPnP (Universal Plug & Play) support
Transparent Bridge Mode
Multi-DMZ
Dynamic DNS
Virtual Servers (Port Forwarding)
Network Diagnostics
