The following security advisory is sent to the securiteam mailing list, and can
be found at the SecuriTeam web site: http://www.securiteam.com
- - promotion
The SecuriTeam alerts list - Free, Accurate, Independent.
Get your security news from a reliable source.
http://www.securiteam.com/mailinglist.html
- - - - - - - - -
TCP/IP IGMP DoS (MS06-007)
------------------------------------------------------------------------
SUMMARY
A specially crafted IGMP packet sent to a vulnerable system could create a
<http://go.microsoft.com/fwlink/?LinkId=21142x> denial of service
situation and cause the system to stop responding.
DETAILS
Vulnerable Systems:
* Microsoft Windows XP Service Pack 1 and Microsoft Windows XP Service
Pack 2
<http://www.microsoft.com/downloads/details.aspx?FamilyId=7BB21D74-C37B-472B-BB10-71D4680680A7>
Download the update
* Microsoft Windows XP Professional x64 Edition
<http://www.microsoft.com/downloads/details.aspx?FamilyId=8E2538CC-CC90-4DB7-8D0B-0B8BA4234E67>
Download the update
* Microsoft Windows Server 2003 and Microsoft Windows Server 2003 Service
Pack 1
<http://www.microsoft.com/downloads/details.aspx?FamilyId=78D7DF14-6049-4318-89CA-9C8681CED8AB>
Download the update
* Microsoft Windows Server 2003 for Itanium-based Systems and Microsoft
Windows Server 2003 with SP1 for Itanium-based Systems
<http://www.microsoft.com/downloads/details.aspx?FamilyId=9AE276CF-AB46-4198-BCB3-3EFFDF15550E>
Download the update
* Microsoft Windows Server 2003 x64 Edition
<http://www.microsoft.com/downloads/details.aspx?FamilyId=12AAE69E-C5C3-4E4A-9970-F5DB84DD9744>
Download the update
* Note The security updates for Microsoft Windows Server 2003, Microsoft
Windows Server 2003 Service Pack 1, and Microsoft Windows Server 2003 x64
Edition also apply to Microsoft Windows Server 2003 R2.
Immune Systems:
* Microsoft Windows 2000 Service Pack 4
* Microsoft Windows 98, Microsoft Windows 98 Second Edition (SE), and
Microsoft Windows Millennium Edition (ME)
Mitigating Factors for IGMP v3 DoS Vulnerability -
<http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=CAN-2006-0021>
CVE-2006-0021:
Firewall best practices and standard default firewall configurations can
help protect networks from attacks that originate outside the enterprise
perimeter. Best practices recommend that systems that are connected to the
Internet have a minimal number of ports exposed.
Note Windows Firewall will help protect against attacks utilizing a
unicast IGMP v3 packet, however, it will not help protect against an
attack utilizing a multicast IGMP v3 packet.
Workarounds for IGMP v3 DoS Vulnerability -
<http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=CAN-2006-0021>
CVE-2006-0021:
Microsoft has tested the following workarounds. While these workarounds
will not correct the underlying vulnerability, they help block known
attack vectors. When a workaround reduces functionality, it is identified
in the following section.
Disable IGMP
Disabling IGMP will prevent an affected host from processing IGMP related
packets that could cause a system to stop responding. IGMP processing can
be disabled by following these steps:
Note Using Registry Editor incorrectly can cause serious problems that may
require you to reinstall your operating system. Microsoft cannot guarantee
that problems resulting from the incorrect use of Registry Editor can be
solved. Use Registry Editor at your own risk. For information about how to
edit the registry, view the "Changing Keys And Values" Help topic in
Registry Editor (Regedit.exe) or view the "Add and Delete Information in
the Registry" and "Edit Registry Data" Help topics in Regedt32.exe.
Note We recommend backing up the registry before you edit it.
1. Click Start, click Run, type "regedit32 " (without the quotation
marks), and then click OK.
2. In Registry Editor, locate the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\
3. Add the DWORD Value: IGMPLevel. Set the value to 0. This value
disables IGMP processing. By default, this key does not exist.
4. You must restart your system for this change to take effect.
Block all IGMP network packets at the firewall or router
Blocking IGMP packets at the firewall or at the router will help protect
systems that are behind that firewall or router from attempts to exploit
this vulnerability. We recommend that you block all unsolicited inbound
communication from the Internet. ISA Server 2000 and ISA Server 2004 can
be used to block the affected types of traffic.
Impact of Workaround: These changes will help prevent attacks by
restricting the ability of an attacker to send malformed IGMP packets to
the affected host. This setting can also negatively impact network
performance and communication by preventing the ability of routers to
properly forward packets between subnets.
Note Windows Firewall will help protect against attacks utilizing a
unicast IGMP v3 packet, however, it will not help protect against an
attack utilizing a multicast IGMP v3 packet.
FAQ for IGMP v3 DoS Vulnerability -
<http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=CAN-2006-0021>
CVE-2006-0021:
What is the scope of the vulnerability?
This is a <http://go.microsoft.com/fwlink/?LinkId=21142> denial of
service vulnerability. An attacker who exploited this vulnerability could
cause the affected system to stop responding. During that time, the server
cannot respond to requests. Note that the denial of service vulnerability
would not allow an attacker to execute code or to elevate their user
rights, but it could cause the affected system to stop accepting requests.
What causes the vulnerability?
The affected messages are not being ignored in certain cases that allow an
attacker to send a malformed packet which may cause affected system to
stop responding.
What is IGMP?
Internet Group Management Protocol (IGMP) is a TCP/IP standard defined in
RFC 1112 "Internet Group Management Protocol (IGMP)." In addition to
defining address and host extensions for how IP hosts support
multicasting, this RFC also defines the Internet Group Management Protocol
(IGMP) version 1. RFC 2236, "Internet Group Management Protocol (IGMP),
version 2" defines IGMP version 2. Both versions of IGMP provide a
protocol to exchange and update information about host membership in
specific multicast groups. Additionally, the Windows Server 2003 family
supports IGMP version 3, described in the Internet Draft titled "Internet
Group Management Protocol, version 3." With IGMP version 3, hosts can
specify interest in receiving multicast traffic from specified sources or
from all but a specific set of sources. For more information about IGMP,
visit the Microsoft Tech Net
<http://www.microsoft.com/technet/prodtechnol/windowsserver2003/library/ServerHelp/ffa6231a-bf9b-4691-a63d-81c9cf66a34e.mspx>
Web site.
Who could exploit the vulnerability?
Any anonymous user who could deliver a specially crafted message to the
affected system could try to exploit this vulnerability.
How could an attacker exploit the vulnerability?
An attacker could try to exploit the vulnerability by creating a specially
crafted message and sending the message to an affected system. The message
could then cause the affected system to stop responding.
What systems are primarily at risk from the vulnerability?
Workstations and Servers are both potentially at risk from this
vulnerability.
Could the vulnerability be exploited over the Internet?
Yes. An attacker could try to exploit this vulnerability over the
Internet. Firewall best practices and standard default firewall
configurations can help protect against attacks that originate from the
Internet. Microsoft has provided information about how you can help
protect your PC. End users can visit the
<http://go.microsoft.com/fwlink/?LinkId=21169> Protect Your PC Web site.
IT professionals can visit the
<http://go.microsoft.com/fwlink/?LinkId=21171> Security Guidance Center
Web site.
What does the update do?
The update removes the vulnerability by modifying the way that the
affected operating systems validate IGMP requests.
When this security bulletin was issued, had this vulnerability been
publicly disclosed?
No. Microsoft received information about this vulnerability through
responsible disclosure.
When this security bulletin was issued, had Microsoft received any reports
that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this
vulnerability had been publicly used to attack customers and had not seen
any examples of proof of concept code published when this security
bulletin was originally issued.
ADDITIONAL INFORMATION
The information has been provided by Microsoft Security.
The original article can be found at:
<http://www.microsoft.com/technet/security/Bulletin/MS06-007.mspx>
http://www.microsoft.com/technet/security/Bulletin/MS06-007.mspx
========================================
This bulletin is sent to members of the SecuriTeam mailing list.
To unsubscribe from the list, send mail with an empty subject line and body to:
list-unsubscribe@securiteam.com
In order to subscribe to the mailing list, simply forward this email to:
list-subscribe@securiteam.com
====================
====================
DISCLAIMER:
The information in this bulletin is provided "AS IS" without warranty of any
kind.
In no event shall we be liable for any damages whatsoever including direct,
indirect, incidental, consequential, loss of business profits or special
damages.
