The following security advisory is sent to the securiteam mailing list, and can
be found at the SecuriTeam web site: http://www.securiteam.com
- - promotion
The SecuriTeam alerts list - Free, Accurate, Independent.
Get your security news from a reliable source.
http://www.securiteam.com/mailinglist.html
- - - - - - - - -
Vulnerability in Telephony Service Allows Remote Code Execution (MS05-040)
------------------------------------------------------------------------
SUMMARY
A vulnerability exits in the Telephony Application Programming Interface
(TAPI) service that could allow remote code execution.
DETAILS
Vulnerable Systems:
* Microsoft Windows 2000 Service Pack 4
<http://www.microsoft.com/downloads/details.aspx?FamilyId=C7417EA1-7AFC-4A55-95DC-E814975B8AE6>
Download the update
* Microsoft Windows XP Service Pack 1 and Microsoft Windows XP Service
Pack 2
<http://www.microsoft.com/downloads/details.aspx?FamilyId=B049004B-AF28-41D7-8AE6-7A3DB15211F1>
Download the update
* Microsoft Windows XP Professional x64 Edition
<http://www.microsoft.com/downloads/details.aspx?FamilyId=705545D0-B53B-4E17-8B62-A4C652697C61>
Download the update
* Microsoft Windows Server 2003 and Microsoft Windows Server 2003 Service
Pack 1
<http://www.microsoft.com/downloads/details.aspx?FamilyId=0097FE14-1D6B-4423-A437-DEA1ED665A07>
Download the update
* Microsoft Windows Server 2003 for Itanium-based Systems and Microsoft
Windows Server 2003 with SP1 for Itanium-based Systems
<http://www.microsoft.com/downloads/details.aspx?FamilyId=BC16BEAE-0BAD-490C-A80F-4BF81C360CA0>
Download the update
* Microsoft Windows Server 2003 x64 Edition
<http://www.microsoft.com/downloads/details.aspx?FamilyId=0CEF9CC2-A7BD-42E0-81B1-EDC303DA8A40>
Download the update
* Microsoft Windows 98, Microsoft Windows 98 Second Edition (SE), and
Microsoft Windows Millennium Edition (ME) Review the FAQ section of this
bulletin for details about these operating systems.
Telephony Service Vulnerability - CAN-2005-0058
A remote code execution vulnerability exists in Telephony Application
Programming Interface (TAPI) that could allow an attacker who successfully
exploited this vulnerability to take complete control of the affected
system.
Mitigating Factors for Telephony Service Vulnerability - CAN-2005-0058:
Remote code execution is possible if you have manually enabled the
telephony server feature. The telephony server feature is only available
on Windows 2000 Server and Windows Server 2003. For information about this
feature, visit the following
<http://www.microsoft.com/technet/prodtechnol/windowsserver2003/library/ServerHelp/a3574189-fd2f-4e12-90d9-c3ecb65a8226.mspx>
Web site.
On Windows Server 2003 the Telephony service is restricted to
authenticated user accounts, even when enabled as a telephony server.
Anonymous attacks are not possible on Windows Server 2003.
On Windows 2000 Server and Windows Server 2003 based systems that have not
manually configured the telephony server feature, this is a local
elevation of privilege vulnerability. An attacker must have valid logon
credentials and be able to log on locally to exploit this vulnerability.
The vulnerability could not be exploited remotely or by anonymous users.
On Windows 2000 Professional and on Windows XP, this is a local elevation
of privilege vulnerability. An attacker must have valid logon credentials
and be able to log on locally to exploit this vulnerability. The
vulnerability could not be exploited remotely or by anonymous users.
By default, the Telephony service is not running on Windows XP and Windows
Server 2003. However, the TAPI client will start the Telephony service
without user interaction when required. Unless the Telephony service has
been set to Disabled by an administrator, a non-privileged user account
can start this service. Systems that have disabled the Telephony service
would not be vulnerable to this issue.
Firewall best practices and standard default firewall configurations can
help protect networks from attacks that originate outside the enterprise
perimeter. Best practices recommend that systems that are connected to the
Internet have a minimal number of ports exposed.
Workarounds for Telephony Service Vulnerability - CAN-2005-0058:
Microsoft has tested the following workarounds. While these workarounds
will not correct the underlying vulnerability, they help block known
attack vectors. When a workaround reduces functionality, it is identified
in the following section.
Disable the Telephony service.
Disabling the Telephony service will help protect the affected system from
attempts to exploit this vulnerability. To disable the Telephony service,
follow these steps:
1. Click Start, and then click Control Panel. Alternatively, Click
Start, point to Settings, and then click Control Panel.
2. Double-click Administrative Tools.
3. Double-click Services.
4. Double-click Telephony.
5. In the Startup type list, click Disabled.
6. Click Stop, and then click OK.
You can also stop and disable the Telephony service by using the following
command at the command prompt:
sc stop tapisrv & sc config tapisrv start= disabled
Impact of Workaround: If the Telephony service is disabled, any dependant
services or operating system features would fail. Examples of these
features include the new connection wizard, RAS, modem based dial-up
networking, and the fax service, would fail. Therefore, we recommend this
workaround only on systems that cannot apply the security update.
Block the following at the firewall:
* UDP ports 135, 137, 138, and 445, and TCP ports 135, 139, 445, and 593
* All unsolicited inbound traffic on ports greater than 1024
* Any other specifically configured RPC port
These ports are used to initiate a connection with RPC. RPC can be used to
remotely communicate with the Telephony service on Windows 2000 Server and
Windows Server 2003. Blocking them at the firewall will help protect
systems that are behind that firewall from attempts to exploit this
vulnerability. Also, make sure that you block any other specifically
configured RPC port on the remote system. We recommend that you block all
unsolicited inbound communication from the Internet to help prevent
attacks that may use other ports. For more information about ports that
RPC uses, visit the following
<http://go.microsoft.com/fwlink/?LinkId=21312> Web site.
To help protect from network-based attempts to exploit this vulnerability,
use a personal firewall, such as the
<http://go.microsoft.com/fwlink/?LinkId=33335> Internet Connection
Firewall, which is included with Windows Server 2003.
By default, the Internet Connection Firewall feature in Windows Server
2003 helps protect your Internet connection by blocking unsolicited
incoming traffic. We recommend that you block all unsolicited incoming
communication from the Internet.
To enable the Internet Connection Firewall feature by using the Network
Setup Wizard, follow these steps:
1. Click Start, and then click Control Panel.
2. In the default Category View, click Network and Internet Connections,
and then click Setup or change your home or small office network. The
Internet Connection Firewall feature is enabled when you select a
configuration in the Network Setup Wizard that indicates that your system
is connected directly to the Internet.
To configure Internet Connection Firewall manually for a connection,
follow these steps:
1. Click Start, and then click Control Panel.
2. In the default Category View, click Networking and Internet
Connections, and then click Network Connections.
3. Right-click the connection on which you want to enable Internet
Connection Firewall, and then click Properties.
4. Click the Advanced tab.
5. Click to select the Protect my computer or network by limiting or
preventing access to this computer from the Internet check box, and then
click OK.
Note If you want to enable certain programs and services to communicate
through the firewall, click Settings on the Advanced tab, and then select
the programs, the protocols, and the services that are required.
To help protect from network-based attempts to exploit this vulnerability,
enable advanced TCP/IP filtering on systems that support this feature.
You can enable advanced TCP/IP filtering to block all unsolicited inbound
traffic. For more information about how to configure TCP/IP filtering, see
<http://support.microsoft.com/kb/309798> Microsoft Knowledge Base Article
309798.
To help protect from network-based attempts to exploit this vulnerability,
block the affected ports by using IPsec on the affected systems.
Use Internet Protocol security (IPsec) to help protect network
communications. Detailed information about IPsec and about how to apply
filters is available in <http://support.microsoft.com/kb/313190>
Microsoft Knowledge Base Article 313190 and
<http://support.microsoft.com/kb/813878> Microsoft Knowledge Base Article
813878.
<FAQ for Telephony Service Vulnerability - CAN-2005-0058:> FAQ for
Telephony Service Vulnerability - CAN-2005-0058:
What is the scope of the vulnerability?
This can be a remote code execution vulnerability or a
<http://go.microsoft.com/fwlink/?LinkId=21142> local privilege elevation
vulnerability, depending on the operating system version and
configuration. See the What systems are primarily at risk from the
vulnerability? questions in the FAQ section for more information. An
attacker who successfully exploited this vulnerability could take complete
control of an affected system. An attacker could then install programs;
view, change, or delete data; or create new accounts with full user
rights.
What causes the vulnerability?
The process that the Telephony service uses to validate data and
permissions.
What is the Telephony service?
The Telephony service provides support for Telephony Application
Programming Interface (TAPI). TAPI integrates telecommunications with the
operating system. TAPI supports both traditional and IP telephony to
provide voice, data, and video communication. Supported hardware includes
sound and video cards, modems, ISDN lines, ATM networks, and cameras. By
using this hardware, you can communicate over direct connections to local
computers, telephone lines, LANs, WANs, and the Internet.
In addition to making and receiving calls, programs can use TAPI to
provide enhanced telephony features such as caller ID, call routing, voice
mail, and video conferencing. Communication programs may identify the
caller, recall and display caller information, and even prioritize or
route a call, based on customer information. For more information about
TAPI, visit the following
<http://www.microsoft.com/technet/prodtechnol/windowsserver2003/library/ServerHelp/7d644322-d216-484c-ab74-028ae65f2116.mspx>
Web site.
What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could take
complete control of the affected system.
Who could exploit the vulnerability?
On Windows 2000 Server, any anonymous user who could deliver a specially
crafted message to the affected system could try to exploit this
vulnerability.
On Windows Server 2003, the Telephony service is restricted to
authenticated user accounts.
On Windows 2000 Professional and on Windows XP, this is a local elevation
of privilege vulnerability.To try to exploit the vulnerability, an
attacker must be able to log on locally to a system and run a program on
Windows 2000 Professional and Windows XP.
What systems are primarily at risk from the vulnerability?
Windows 2000 Servers that are configured as telephony servers are
primarily at risk from anonymous attackers. However, an administrator must
take steps to configure a Windows 2000 Server computer as a telephony
server. To see these steps, visit the following
<http://www.microsoft.com/windows2000/en/advanced/help/default.asp?url=/windows2000/en/advanced/help/TAPI_server_enable_disable.htm>
Web site.
Windows Server 2003 systems that configured as telephony servers are at
risk from authenticated attackers. However, an administrator must take
steps to configure a Windows Server 2003 computer as a telephony server.
To see these steps, visit the following
<http://www.microsoft.com/technet/prodtechnol/windowsserver2003/library/ServerHelp/a3574189-fd2f-4e12-90d9-c3ecb65a8226.mspx>
Web site.
On systems that have not been configured as a telephony server, on Windows
2000 Professional, and on Windows XP, this is a local elevation of
privilege vulnerability.
Systems that have disabled the Telephony service are not vulnerable to
this issue.
Are Windows 98, Windows 98 Second Edition or Windows Millennium Edition
critically affected by this vulnerability?
No. Although Windows 98, Windows 98 Second Edition, and Windows Millennium
Edition do contain the affected component, the vulnerability is not
critical. For more information about severity ratings, visit the following
<http://go.microsoft.com/fwlink/?LinkId=21140> Web site.
Could the vulnerability be exploited over the Internet?
Yes. An attacker could try to exploit this vulnerability over the
Internet. Firewall best practices and standard default firewall
configurations can help protect against attacks that originate from the
Internet. Microsoft has provided information about how you can help
protect your PC. End users can visit the
<http://go.microsoft.com/fwlink/?LinkId=21169> Protect Your PC Web site.
IT professionals can visit the
<http://go.microsoft.com/fwlink/?LinkId=21171> Security Guidance Center
Web site.
What does the update do?
The update removes the vulnerability by modifying the way that Telephony
service validates the length of a message before it passes the message to
the allocated buffer.
When this security bulletin was issued, had this vulnerability been
publicly disclosed?
No. Microsoft received information about this vulnerability through
responsible disclosure. Microsoft had not received any information to
indicate that this vulnerability had been publicly disclosed when this
security bulletin was originally issued.
When this security bulletin was issued, had Microsoft received any reports
that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this
vulnerability had been publicly used to attack customers and had not seen
any examples of proof of concept code published when this security
bulletin was originally issued.
CVE Information:
<http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=CAN-2005-0058>
CAN-2005-0058
ADDITIONAL INFORMATION
The information has been provided by Microsoft Product Security.
The original article can be found at:
<http://www.microsoft.com/technet/security/Bulletin/MS05-040.mspx>
http://www.microsoft.com/technet/security/Bulletin/MS05-040.mspx
========================================
This bulletin is sent to members of the SecuriTeam mailing list.
To unsubscribe from the list, send mail with an empty subject line and body to:
list-unsubscribe@securiteam.com
In order to subscribe to the mailing list, simply forward this email to:
list-subscribe@securiteam.com
====================
====================
DISCLAIMER:
The information in this bulletin is provided "AS IS" without warranty of any
kind.
In no event shall we be liable for any damages whatsoever including direct,
indirect, incidental, consequential, loss of business profits or special
damages.
